 |
UTILITY
DOORS
Utility Grade Doors from CannonBall:HNP are economical designs intended
for low to moderate traffic
applications and are available with a full range of accessories. Utility
Grade doors are designed to survive years of abuse while retaining an
appealing look. All models feature aluminum frames, insulated panels,
and stainless steel ranges.
1734
SERIES
A quality, all-purpose door design, the 1734 Series door includes
a white extruded aluminum frame and rolled edge
1-3/4” insulated panel with 26ga white steel skins. A universal
swing, fully pre-finished design with integral nailing fins. Compatible
with all standard door accessories. |
|
1822
SERIES
Designed for agricultural and temporary applications, the 1822 features
our 1-5/8” insulated edged panel in a mill finish extruded aluminum
frame with nailing fins. A universal swing model, the 1822 is available
with a variety of lites and accessories. The door panel is available
with steel, fiberglass, or aluminum skins. |
|
1852/1872
SERIES
Our most popular utility door, the 1852 family of universal swing
doors features 1-5/8” insulated edged panels in a 3-1/2”
extruded aluminum frame. The frame is available in mill, white or
brown while the panel is available in white or brown. This model
is also available with integral or slide-in nailing fins and J-channels.
Panels are available with steel, fiberglass or aluminum skins and
are available with a variety of lites and accessories.
| |
95RE
SERIES
All steel construction for industrial and
agricultural applications. Designed for medium traffic and abusive
environments and fully assembled, ready to install, for interior
or exterior applications. |
|
BUILDERS
CHOICE DOORS
Builders Choice Doors from CannonBall:HNP are designed for use in agricultural,
residential, industrial, and light commercial applications. Available
in white or brown with steel or extruded aluminum frames, all Builders
Choice doors feature 1-3/4” insulated rolled edge panels, nylon
lockset inserts, stainless steel hinges and pre-painted steel skins. Builders
Choice Doors are one of the best values in the walk door marketplace today.
2004AL
SERIES
The most economical of the Builders Choice Doors, the 2004AL features
26ga pre-painted steel skins and mill or pre-painted 3-1/2”
extruded aluminum frame. A universal swing design, the 2004AL can
be equipped with nailing fins, J-channels, snap cap and a variety
of lites and accessories. |
|
2004ST
SERIES
Our most popular steel frame model, the 2004ST is an excellent choice
for most door applications. Featuring a 3-1/2” depth 16ga pre-painted
steel frame and 24ga pre-painted steel skins, the 2004ST is built
to last. A universal swing design with snap cap included, the 2004ST
can be equipped with a variety of lites and accessories. |
|
2004STB
SERIES
For applications where temperature differences are an issue, the 2004STB
features a full thermal break of the panel, jambs, and header/threshold.
This model is designed with a 3-1/2” depth 16ga pre-painted
steel frame and 24ga pre-painted steel skins. Universal swing with
snap caps included, the 2004STB can be equipped with a variety of
lites and accessories. |
|
HEAVY
DUTY DOORS
Heavy Duty Doors from CannonBall:HNP are designed for medium traffic agricultural,
industrial and commercial applications. All Heavy Duty series doors are
prepped for panic and closer standard. Each model features a 3-1/2”
depth 16ga pre-painted steel frame and an insulated 1-3/4” panel
with 24ga pre-painted steel skins. Heavy Duty doors include snap caps
for improved weather seal as well as ADA-approved universal header/thresholds
for universal swing. All Heavy Duty Doors are also available in a 5”
Deep Frame (DF) design and can be equipped with an 8” subframe (SF)
for masonry applications. All Heavy Duty doors are available with a variety
of lites and accessories.
| |
|
2005HD
SERIES
Our most popular door for light commercial applications, the 2005HD
is available standard in white or bronze and can also be custom painted
to match virtually any color scheme. Designed with preps for the most
common non-residential accessories, the 2005HD can easily be adapted
to most any walk door application. |
|
2005TB
SERIES
For the versatility of our Heavy Duty Doors in a design for temperature
differential issues, our 2005TB includes all the standard features
and options of our Heavy Duty Doors in a fully thermally broken design.
The 2005TB features full thermal breaks of panel, jambs, and header/thresholds.
|
|
COMMERCIAL DOORS
Commercial Doors from CannonBall:HNP are designed for medium to high traffic
agricultural, industrial and commercial applications. A great door option
for post frame and metal building contractors who are expanding beyond agricultural
buildings. All Commercial series doors are prepped for panic and closer
standard. Each model features a 3-1/2” depth 16ga pre-painted steel
frame and an insulated 1-3/4” panel with 24ga pre-painted steel skins.
Commercial Doors feature ADA-approved thresholds and solid headers so swing
must be specified when ordering. For the ultimate in ease of installation,
many Commercial Door customers opt to have their optional hardware, such
as panic, closers, pulls and kick plates factory installed. All Commercial
Doors are also available in a 5” Deep Frame (DF) design and can be
equipped with an 8” subframe (SF) for masonry applications. All Commercial
Doors are available with a variety of lites and accessories.
| |
|
2006CM
SERIES
The strongest, most durable design available, Commercial Doors from
CannonBall:HNP are available in standard colors of white or bronze
and can be custom painted if desired. Often ordered with options pre-installed,
our Commercial Door program takes the guesswork out of installation
and eliminates jobsite hassles and mix-ups. |
|
2006TB
SERIES
With a full thermal break of panel, jambs, header and threshold our
2006TB provides all of the advantages of our Commercial Door program
in a design suitable for temperature differential issues. |
Line
Art
Hi-Res Image
Literature
|
CERTIFIED DOORS
In many situations, a building design may require special features or
certifications in order to meet building codes. Certified Doors from CannonBall:HNP
are designed and manufactured to meet these special requirements. Certified
Doors feature 1-3/4” insulated panels with white prime 24ga steel
skins in a unique, white prime 18ga adjustable steel frame. Frame trims
are available to accommodate wall thicknesses up to 7-1/2”. A “drywall”
frame design, Certified Doors feature nailing flanges on both sides with
optional steel casing kit to hide the fasteners, making this unit suitable
for both exterior and interior applications.
2007FR
SERIES
A certified B-label fire door, the 2007FR is available in 3068 and
3070 and includes a smoke gasket. Due to the specifics of the fire
certification, this model requires that a strip of drywall be installed
between the frame flanges and the wall. |
|
SPECIAL USE DOORS
Special Use Doors from CannonBall:HNP are designed for specific applications
with unique design and material requirements. Door specifications and available
options and accessories will vary by model.
|
|
CB•FG
Ideal for confinement and other corrosive environments, the CB FG
features pultruded fiberglass frame and panel edging with fiberglass
skins on the 1-3/4” insulated panel. The frame is reinforced
internally with extruded aluminum for superior strength and durability.
The color is integral with the fiberglass – no painting required. |
|
CB•SS
Popular for food processing and related applications, the CB SS is
an all Stainless Steel model featuring thermal break of the insulated
panel and 3-1/2” depth frame. The CB SS is a solid header unit
for maximum durability. Available with lites framed in stainless steel. |
|
2004SSE
SERIES
A favorite of car washes and other corrosive applications, the 2004SSE
features the same construction as our 2004AL with a mill finish frame,
however stainless steel skins are used on either or both side of the
door panel. A more economical design for corrosive environments. |
|
CB•PVC
The CB PVC features a panel and frame system constructed entirely
of extruded PVC. The 1-3/4” panel is non-insulated however internal
ribs provide this unit with tremendous strength and resistance to
dents and dings. No painting required as the white is extruded into
the PVC. |
|
CB•ACCESS
For sliding doors were an access door needs to be installed in the
slider, our CB ACCESS door is a complete kit designed for the job.
This unit includes a specially designed lockset for clearance and
framing rails are integral to the door frame for receiving the structural
girts used to frame the slider. |
|
|
WALK
DOOR ACCESSORIES
All types of walk door accessories are available from CannonBall:HNP.
All accessories can be installed in doors at time of ordering or
can be purchased separately. Special hard-to-find items can often
be located through our network of suppliers, so even those items
we don’t usually work with can be included with your CannonBall:HNP
doors.
|
|
 |
